Date:

2024.04.07

Aircraft Firmware:

v09.02.07.06

Remote Controller Firmware:

v02.01.03.19

DJI Pilot 2 App:

v9.2.0.25

DJI Assistant 2:

v2.1.12


What’s New


    Added Slope Route to facilitate photogrammetry for a single slope.

    Added Live Mission Recording for linear route, which supports adjustable altitude during flight. The waypoints added when the aircraft is close to the subject can be connected as the center line of the flight area.

    Added support for Custom Break Point for flight tasks. The break point can be modified in the flight route settings.

    Added Smart Low-Light mode for waypoint route. Only fixed angle shot is supported. When enabled, shooting effects in low-light environments will be improved.

    Added Vision Assist. This function can be enabled in system settings > aircraft settings > Assist, which provides a real-time surrounding view of aircraft in the lower right corner of the liveview.

    Added AR RTH Route and AR Landing Point. This function is enabled by default, and can be disabled in system settings > aircraft settings > Assist.

    Added White Balance setting for Mavic 3E camera.

    Adjusted product software service areas.

    Custom settings for Enhanced Transmission can be saved and automatically applied to the remote controller and aircraft when DJI Pilot 2 is started.

    Optimized the logic of Max Altitude setting: when the value is set to more than 500 m, the current setting will be retained after restart.

    Optimized the logic of Smart RTH setting, so that the current settings can be retained after restart.

    Optimized the UI interaction such as liveview settings, and route creation for linear route.



Notes:


    Once the firmware is updated, the aircraft cannot revert to firmware version v09.00.05.05 or earlier, the remote controller cannot revert to firmware version v02.01.02.02 or earlier.

 


    Restart the aircraft and remote controller after the update is complete.

    If the update fails, restart the aircraft, remote controller, and DJI Pilot 2 or DJI Assistant 2 (Enterprise Series), and retry.

    Make sure the firmware of the aircraft and the remote controller, and DJI Pilot 2 are the latest versions. Otherwise, usage may be affected.